Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Store

Modifiche al passo #2

Modifica in base a Cole O'Neal-

Modifica approvata da Adam O'Camb

Prima di
Dopo il
Invariato

Righe Passo

[* black] Starting from the bottom corner usingcorner, use the thin blunt side of a Spudger I separatedto separate the back from the metal bezel. THIS CAN CAUSE COSMETIC & INTERNAL DAMAGE if you are not careful.
[* black] You could useUse a thumb nail, plastic spudger, or pry tool to move upraise one side releasing the plastic clips. Then raiseraise the other side and the top should pull off with ease.
[* black] NOTE:icon_note] During reassembly the back may fight a little to go back on. Start from the side and go around do not be afraid to pinch it with a little muscle.
[* black] Starting from the bottom corner usingcorner, use the thin blunt side of a Spudger I separatedto separate the back from the metal bezel. THIS CAN CAUSE COSMETIC & INTERNAL DAMAGE if you are not careful.
[* black] You could useUse a thumb nail, plastic spudger, or pry tool to move upraise one side releasing the plastic clips. Then raiseraise the other side and the top should pull off with ease.
[* black] NOTE:icon_note] During reassembly the back may fight a little to go back on. Start from the side and go around do not be afraid to pinch it with a little muscle.