Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Componenti & Strumenti

Modifiche al passo #3

Modifica in base a Nicolas Siemsen-

Modifica approvata da Nicolas Siemsen


Righe Passo

[* black] Alternatively, replace the seal on your new style plastic oil filler cap.
[* black] This seal is thinner, and a bit harder to remove. Gently pull it out with needle nose pliers being careful not to damage the cap.
[* black] Just like the seal on the fuel cap previously pictured, this seal is somewhat hardened and has a permanent groove in it. Replacing it with a new seal will likely stop the oil staining no the valve cover around it.

Immagine 1

Nessuna immagine precedente.


Immagine 2

Nessuna immagine precedente.