Salta al contenuto principale

Modifiche al passo #12

Modifica in base a Curtis Haley-

Modifica approvata da Marty Rippens

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] Place the hydraulic jack back under the car and lift it off the cinder blocks or jack stands.
[* black] Remove the cinder blocks or jack stands and lower the car back to the ground.
[* black] Further tighten the lug nuts using the torque wrench.
[* icon_note] Tighten each nut with the lug wrencha torque wrench to a torque of 80ft/lb80ft/lb, with the following pattern to ensure proper tire alignment.
[* icon_note] Tighten each nut with the lug wrencha torque wrench to a torque of 80ft/lb80ft/lb, with the following pattern to ensure proper tire alignment.