Salta al contenuto principale

Modifiche al passo #12

Modifica in base a Olivia DeVos-

Modifica approvata da Marty Rippens

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] Place the hydrolichydraulic jack back under the car and lift it off your blockthe cinder block or blocks.
[* black] Remove the blockblocks and lower the car back to the ground.
[* black] Further tighten the lug nuts using the torque wrenchwrench.
[* icon_note] WheelTighten wheel lug should be torqued to 80ft/lba torque of 80ft/lb.
[* black] Place the hydrolichydraulic jack back under the car and lift it off your blockthe cinder block or blocks.
[* black] Remove the blockblocks and lower the car back to the ground.
[* black] Further tighten the lug nuts using the torque wrenchwrench.
[* icon_note] WheelTighten wheel lug should be torqued to 80ft/lba torque of 80ft/lb.