Salta al contenuto principale

Modifiche al passo #10

Modifica in base a Olivia DeVos-

Modifica approvata da Marty Rippens

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] Use the 14mm wrench or 14mm socket wrench to tie uptighten the sway bar link until it is tiedlink.
[* black] Do the same thingRepeat for the top onesway bar link.
[* black] Use the 14mm wrench or 14mm socket wrench to tie uptighten the sway bar link until it is tiedlink.
[* black] Do the same thingRepeat for the top onesway bar link.
[* icon_note] The 4mm Allen wrench is not necessary for this step because the sway bar link is new.