Salta al contenuto principale

Modifiche al passo #10

Modifica in base a Will McLeod-

Modifica approvata da Marty Rippens

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] Use the 4mm Allen wrench or 14mm socket wrench to tighten the nut onto the bottom sway bar link.
[* black] Repeat for the top sway bar link.
[* icon_note] The 14mm4mm Allen wrench is not necessary for this step.
[* icon_note] The 14mm4mm Allen wrench is not necessary for this step.