Salta al contenuto principale

Modifiche al passo #10

Modifica in base a Tyler Shafer-

Modifica approvata da Marty Rippens

Eliminato
Aggiunto
Invariato

Righe Passo

[* red] Use the 14mm wrench or 14mm socket wrench to tighten the sway bar link.
[* orange] Repeat for the top sway bar link.
[* icon_note] The 14mm4mm Allen wrench is not necessary for this step because the sway bar link is new.
[* icon_note] The 14mm4mm Allen wrench is not necessary for this step because the sway bar link is new.