Salta al contenuto principale

Modifiche al passo #10

Modifica in base a Will McLeod-

Modifica approvata da Marty Rippens

Eliminato
Aggiunto
Invariato

Righe Passo

[* blackred] Use the 14mm wrench or 14mm socket wrench to tighten the sway bar link.
[* blackorange] Repeat for the top sway bar link.
[* blackred] Use the 14mm wrench or 14mm socket wrench to tighten the sway bar link.
[* blackorange] Repeat for the top sway bar link.
[* icon_note] The 14mm Allen wrench is not necessary for this step because the sway bar link is new.

Immagine 2

Vecchia Versione

Nuova Versione