Salta al contenuto principale

Modifiche al passo #6

Modifica in base a Jon Curtis-

Modifica approvata da Jon Curtis

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] Use the 14mm socket wrench to take off the nut.
[* icon_note] If the sway bar link's joinjoint is spinning and the nut woulddoes not come off, then use the 4mm Allen wrench to hold down the sway bar link. See the second picture for more detaildetails.
[* icon_note] If the sway bar link's joinjoint is spinning and the nut woulddoes not come off, then use the 4mm Allen wrench to hold down the sway bar link. See the second picture for more detaildetails.