Salta al contenuto principale

Modifiche al passo #3

Modifica in base a Jake Devincenzi-

Modifica approvata da Jake Devincenzi

Prima di
Dopo il

Righe Passo

-[* black] Take a flat head screwdriver and insert it into the hole to remove the batteries.
-[* black] You might want to use one hand to hold the device, just put the flat head in the hole and then lightly pull it up. If you do it too rough you might break it.
-[* black] Repeat for the other side.
+[* black] Insert a spudger into the slot at the bottom of the lower battery cover, and pry the cover up.
+ [* icon_caution] You only need to apply minimal pressure to lift the cover. If you force it too hard, you may snap the plastic.
+[* black] Repeat for the second battery cover.