Salta al contenuto principale

Modifiche al passo #3

Modifica in base a Arthur Shi-

Modifica approvata da Arthur Shi

Eliminato
Aggiunto
Invariato

Righe Passo

[* icon_caution] '''Caution: '''The circuit board contains many capacitors that could cause serious injury. Use a [guide|2177|capacitor discharge probe|new_window=true] to safely rid the capacitors of dangerous charges.
[* icon_note] Wearing electrically insulated gloves and rubber soled shoes while working with and near the capacitors ensures greater safety and protection against electric shock. See iFixit's [http://edu.ifixit.com/Wiki/Project_Safety#Section_Flat_Panel_TVs_and_Computer_Monitors|Project Safety] page for additional safety information.
[* red] Note the 4 large '''flat head machine screws''' which hold the clamps on the opposite side; remove them with a '''#2 phillips head screwdriver'''.
[* icon_note] The clamps are meant to hold the audio amplification PCB's IC's to the common heat sink; they ensure proper contact between the heat sink and the IC's through the ceramic thermal paste.