Salta al contenuto principale

Modifiche al passo #1

Modifica in base a gameslammer7-

Modifica approvata da gameslammer7

Eliminato
Aggiunto
Invariato

Righe Passo

[* red] There are '''two, silver, 6 mm-long machine screws''' with '''two 1/8" inner-diameter washers''' on the exterior of the metal electronics box; ''remove these first'' using a '''#2 philips screwdriver'''.
[* orange] There are '''five of the same type of machine screw (silver, 6 mm-long)''' remaining around the metal electronics box's exterior; remove these as well.
[* icon_reminder] You should have removed a total of '''7 machine screws''' and '''2 washers'''.
[* icon_note] The reason for removing the two screws with the two washers first (or replacing them last when reassembling) is that their holes are actually slots. They are designed as slots to accommodate slop in the assembly, and if unscrewed out of order, you may have difficulty while removing - or possibly even damage - the other five screws.

Immagine 1

Nessuna immagine precedente.

Aggiunto

Immagine 2

Nessuna immagine precedente.

Aggiunto

Immagine 3

Nessuna immagine precedente.

Aggiunto