Salta al contenuto principale

Modifiche al passo #6

Modifica in base a Colin Mitchell-

Modifica approvata da Colin Mitchell

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] Insert the metal screwdriver as pictured: oriented vertically, underneath the yellow plastic piece in the switch assembly, between the metal contact of the switch and the gray plastic slider flange.
[* black] Pry upward to remove the yellow plastic piece; the metal contact piece may pop out with the plastic piece.
[* black] Once the metal and plastic are unseated from one side, pull out the metal contact and yellow plastic piece with pliers or fingers. Remove these pieces.

Immagine 1

Nessuna immagine precedente.

Aggiunto