Salta al contenuto principale

Modifiche al passo #4

Modifica in base a bushing-

In attesa di approvazione

Prima di
Dopo il
Invariato

Righe Passo

[* black] Carefully separate the two pieces by hand.
-[* icon_reminder] Pay close attention to the orientation of the right and left bumper pins and springs. Installing the springs in the same manner as they were removed will cut down on reassembly time and frustration.
-[* icon_caution] When putting the top and bottom half back together, make sure that the power switch cover on the bottom housing piece is in the off (down) position. Otherwise, the power switch cover can break the very fragile power switch upon reassembly.
+[* blue] The two shoulder buttons are made up of three pieces -- the plastic button, a pin, and a spring. If they accidentally pop out while you are working, study the picture and make sure you put the spring in the correct position.
+[* violet] When reassembling the cover, make sure that the power switch cover on the bottom case is in the off (down) position. Otherwise, the power switch cover can break the very fragile power switch upon reassembly.

Immagine 1

Vecchia Versione

Nuova Versione

Immagine 2

Vecchia Versione

Nuova Versione

Immagine 3

Eliminato