Salta al contenuto principale

Modifiche al passo #3

Modifica in base a Edwin Onofre-

Modifica rifiutata da Kristen Gismondi

Prima di
Dopo il
Invariato

Righe Passo

[* black] Flip the unit over.
[* black] Use a spudger to pry open the gap between the bottom case and the front panel. Work all the way around the case until the panel is free.
-[* blue] Avoid touching the L and R shoulder buttons, because they pop off easily and are difficult to reassemble. Keeping the bottom case against your workbench will help hold them in place.
+[* blue] Avoid touching the L and R shoulder buttons because they pop off easily and are difficult to reassemble. Keeping the bottom case against your workbench will help hold them in place.