Salta al contenuto principale

Modifiche al passo #1

Modifica in base a bushing-

In attesa di approvazione

Prima di
Dopo il
Invariato

Righe Passo

-[* red] Remove the 6 Phillips head screws that hold the back cover in place. There are two under the battery. (In some cases, the screws are tri-head, not Phillips.)
+[* black] Remove the following 7 screws securing the lower case to the DS Lite:
+ [* red] 3 tri-wing screws (silver)
+ [* orange] 1 tri-wing screw (black)
+ [* yellow] 2 Phillips screws (gold)
+ [* blue] 1 Phillips screw (silver)
+[* icon_note] Do not remove the unmarked screw (in the battery compartment); it holds the main PCB in place.

Immagine 2

Nessuna immagine precedente.

Aggiunto