Salta al contenuto principale

Modifiche al passo #3

Modifica in base a Jared Cooper-

Modifica approvata da Jared Cooper

Eliminato
Aggiunto
Invariato

Righe Passo

[* yellow] Flip the netbook over and extract the eight screws that secure the top cover in place with a PH1 screwdriver.
[* icon_caution] Taking the top cover off without removing the hard drive may be possible, but possible risk of breaking several tabs located on the backside of the top cover may occur.
[* black] Using the flat end of the spudger or pry stick, extrude the top cover away from the base by wedging the tool between the base and top cover and run the tool along the side until the cover pops out.
[* black] Next, carefully flip the top cover in front of the netbook to dislocate the touch-pad ribbon cable from the motherboard.