Salta al contenuto principale

Modifiche al passo #2

Modifica in base a Nathan Reeve-

Modifica approvata da Nathan Reeve

Eliminato
Aggiunto
Invariato

Righe Passo

[* icon_caution] Four black internal wires, three thin and one thick, are connected to the logic board: three by small end clips and one by a larger end clip. Handle the clips gently; they break easily.
[* icon_caution] Four black internal wires, three thin and one thick, are connected to the logic board: three by small end clips and one by a larger end clip. Handle the clips gently; they break easily.
[* black] To detach the small clips from the connectors, place the flat end of the plastic spudger underneath the clip and gently lever it '''away from the center of the device'''.
[* black] To detach the large clip from its connector, place the flat end of the spudger on the clip and lever it '''upward''' out of the connector.