Salta al contenuto principale

Modifiche al passo #2

Modifica in base a Keith Yu-

Modifica approvata da Keith Yu

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] Four internal wires are connected to the logic board: three by small end clips and one by a larger end clip. To detach the small clips from the connectors, place the flat end of the plastic spudger underneath the clip and gently lever it '''toward youaway from the center of the device'''.
[* black] Four internal wires are connected to the logic board: three by small end clips and one by a larger end clip. To detach the small clips from the connectors, place the flat end of the plastic spudger underneath the clip and gently lever it '''toward youaway from the center of the device'''.
[* black] To detach the larger one, place the flat end of the plastic spudger on the side of the clip and lever it '''upward'''.
[* icon_caution] Handle the clips gently; they break easily.