Salta al contenuto principale

Modifiche al passo #2

Modifica in base a Rachel Kangas-

Modifica approvata da Rachel Kangas

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] Four internal wireswires, three thin and one thick, are connected to the logic board: three by small end clips and one by a larger end clip. To detach the small clips from the connectors, place the flat end of the plastic spudger underneath the clip and gently lever it '''away from the center of the device'''.
[* black] Four internal wireswires, three thin and one thick, are connected to the logic board: three by small end clips and one by a larger end clip. To detach the small clips from the connectors, place the flat end of the plastic spudger underneath the clip and gently lever it '''away from the center of the device'''.
[* black] To detach the larger one, place the flat end of the plastic spudger on the side of the clip and lever it '''upward'''.
[* icon_caution] Handle the clips gently; they break easily.

Immagine 2

Nessuna immagine precedente.

Aggiunto