Salta al contenuto principale

Modifiche al passo #4

Modifica in base a Rachel Kangas-

Modifica approvata da Rachel Kangas

Eliminato
Aggiunto
Invariato

Righe Passo

[* red] Using the T9 Torx head, loosen, but,but '''do not remove''' the two screws at the bottom of the 1.2 inch1.2-inch gap going downin the middle of the deviceinternal structure.
[* icon_reminder] These screws are spring-loaded and can come out;stay in the device, even when loosened; however, it is still possible for them to be fully removed. Be careful to not lose'''only partially loosen''' them. If you don't fully loosen the screw, then they can stay on the internal structure.
[* red] Using the T9 Torx head, loosen, but,but '''do not remove''' the two screws at the bottom of the 1.2 inch1.2-inch gap going downin the middle of the deviceinternal structure.
[* icon_reminder] These screws are spring-loaded and can come out;stay in the device, even when loosened; however, it is still possible for them to be fully removed. Be careful to not lose'''only partially loosen''' them. If you don't fully loosen the screw, then they can stay on the internal structure.