Salta al contenuto principale

Modifiche al passo #4

Modifica in base a Keith Yu-

Modifica approvata da Keith Yu

Eliminato
Aggiunto
Invariato

Righe Passo

[* red] Using the T9 Torx head, remove the two screws at the bottom of the 1.2 inch gap going down the middle of the device.
[* icon_reminder] The internal structure will thenThese screws can come out; be released fromcareful to not lose them. If you don't fully loosen the case; however, unlike most screws,screw, then they will not come out ofcan stay on the deviceinternal structure.
[* icon_reminder] The internal structure will thenThese screws can come out; be released fromcareful to not lose them. If you don't fully loosen the case; however, unlike most screws,screw, then they will not come out ofcan stay on the deviceinternal structure.

Immagine 1

Vecchia Versione

Nuova Versione