Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Componenti & Strumenti

Modifiche al passo #2

Modifica in base a bushing-

In attesa di approvazione

Eliminato
Aggiunto
Invariato

Righe Passo

[* icon_note] We recommend placing the computer on a soft cloth from this point on to prevent damaging the logic board.
[* black] Turn over the computer and open it.
[* red] Remove the 2 Phillips screws (4mm) from the edges of the keyboard area.
[* orange] Remove the 3 mm Phillips Screw inScrews from the lower left corner.
[* orange] Remove the 3 mm Phillips Screw inScrews from the lower left corner.