Modifiche al passo #4
Righe Passo
| + | [title] Remove Bottom Panel and Bottom Wiring. |
|---|---|
| + | [* black] Unscrew the bottom panel. |
| + | [* black] Disconnect the long black and white wires at the upper part of the device and bottom part. You can pull them out of the casing and set them aside. When putting these back later, make sure they are nice and snug. |
| + | [* black] Disconnect the bottom LCD wire. It is orange and black and near the right. |
| + | [* black] Remove the bottom board. |
Immagine 1
Nessuna immagine precedente.
Aggiunto
Immagine 2
Nessuna immagine precedente.
Aggiunto