Skip to main content

Modifiche a questo Step

Modifica in base a Ryan Slomski-

In attesa di approvazione

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] Separate circuit board from screen by using the tweezers to pull the white plate away from the logic board.
[* black] Pull each white tab separately. GentlyGently remove the screen from its casing.
[* icon_caution] Do this next step gently because wires will still be connected
Wedge open each clip to the casing. Do NOT detach these wiresside to unhook the screen from the logic board.
[* black] Pull each white tab separately. GentlyGently remove the screen from its casing.
[* icon_caution] Do this next step gently because wires will still be connected
Wedge open each clip to the casing. Do NOT detach these wiresside to unhook the screen from the logic board.
[* icon_note] This leaves you with the screen off and the circuit board connected to the external screen, which is connected to the top face plate. (shown in second picture)