Salta al contenuto principale

Modifiche a questo Step

Modifica in base a Ryan Slomski-

In attesa di approvazione

Eliminato
Aggiunto
Invariato

Righe Passo

[* redblack] Separate circuit board from screen by using the tweezers to pull the white plate away from the logic board.
[* redblack] Separate circuit board from screen by using the tweezers to pull the white plate away from the logic board.
[* black] Pull each white tab separately. Gently remove the screen from its casing.
[* icon_caution] Do this next step gently because wires will still be connected to the casing. Do NOT detach these wires.
[* icon_note] This leaves you with the screen off and the circuit board connected to the external screen, which is connected to the top face plate. (shown in second picture)
[* icon_caution] Do this step gently because wires will still be connected to the casing. Do not detach these wires.