Aggiusta le tue cose Community Store

Modifiche al passo #1

Modifica di Luke Butzow —

Modifica approvata da Luke Butzow

Prima di
Dopo il
Invariato

Righe Passo

-[* black] Flip the skateboard on its side
-[* red] Use a 13mm socket wrench to remove the nut holding the wheel on to the trucks
-[* black] Pull the wheel off
-[* icon_caution] There will be a small washer between the nut and the bearing, be sure to not lose this.
+[* black] Flip the skateboard on it's side.
+[* red] Use a 13mm socket wrench to remove the nut that holds the wheel on to trucks.
+[* black] Pull the wheel off.
+[* icon_caution] There will be a small washer between the nut and the bearing, make sure you don't lose it.