Modifiche al passo #5
Modifica di Spencer Pennington —
Modifica approvata da Spencer Pennington
- Prima di
- Dopo il
- Invariato
Righe Passo
| + | [* icon_note] Many of the following steps involve parts with a lot of damping grease. You may choose to wear rubber gloves to keep the grease off of your hands. |
|---|---|
| [* black] Remove the front end of the tray release arm from the front tray release mechanism by pulling it towards the center of the Cricut, then lifting it up. | |
| [* icon_reminder] During reassembly: | |
| - | [* black] If a lot of damping grease was lost during disassembly, use a spudger to [link|https://guide-images.cdn.ifixit.com/igi/wyffhEi2ZR6R2xnF.full|apply new high viscosity damping grease|new_window=true] to the tray release mechanism. |
| + | [* black] If a lot of damping grease was lost during disassembly, use a spudger or popsicle stick to [link|https://guide-images.cdn.ifixit.com/igi/wyffhEi2ZR6R2xnF.full|apply new high viscosity damping grease|new_window=true] to the tray release mechanism. |
| [* black] Use paper towels and isopropyl alcohol to clean up any excess grease. If you're cleaning grease from electronic components, make sure you use high concentration (greater than 90%) alcohol. |