Aggiusta le tue cose Community Store

Modifiche al passo #4

Modifica di Spencer Pennington —

Modifica approvata da Spencer Pennington

Prima di
Dopo il
Invariato

Righe Passo

[title] Remove the screws from the metal track
-[* icon_note] Inside the Cricut are seven [link|https://guide-images.cdn.ifixit.com/igi/KXtG2binGWdCaJlk.full|screws|new_window=true] securing the top cover to the metal track that guides the tool holder. You can reach these screws by [link|https://guide-images.cdn.ifixit.com/igi/ur2RxlpgSNucZ2PR.full|putting a screwdriver bit in a ratcheting socket wrench|new_window=true]. If you are using iFixit bits, the smaller bits work with a 4‑mm socket and the larger bits work with a 1/4‑inch socket.
+[* icon_note] Inside the Cricut are seven [link|https://guide-images.cdn.ifixit.com/igi/KXtG2binGWdCaJlk.full|screws|new_window=true] securing the top cover to the metal track that guides the tool holder. You can reach these screws by [link|https://guide-images.cdn.ifixit.com/igi/ur2RxlpgSNucZ2PR.full|putting a screwdriver bit in a ratcheting socket wrench|new_window=true]. If you're using iFixit bits, the smaller bits work with a 4‑mm socket and the larger bits work with a 1/4‑inch socket.
[* red] Remove the seven 9.8 mm‑long Phillips screws securing the top cover to the metal track.