Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Componenti & Strumenti

Modifiche al passo #16

Modifica in base a Andrew Bookholt-

In attesa di approvazione

Prima di
Dopo il
Invariato

Righe Passo

[* red] Remove the two 8 mm Phillips screws securing the camera cable retainer to the upper case.
[* icon_reminder] One of the screws may remain captive in the camera cable ground loop. If replacing the display, be sure to transfer this screw to the new unit.
[*
black] Insert wisdom hereLift the camera cable retainer out of the upper case.
[* red] Remove the two 8 mm Phillips screws securing the camera cable retainer to the upper case.
[* icon_reminder] One of the screws may remain captive in the camera cable ground loop. If replacing the display, be sure to transfer this screw to the new unit.
[*
black] Insert wisdom hereLift the camera cable retainer out of the upper case.

Immagine 1

Vecchia Versione

Nuova Versione