Salta al contenuto principale

Modifiche al passo #20

Modifica in base a Walter Galan-

In attesa di approvazione

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] Insert wisdom hereLift the logic board enough to gain clearance and use a spudger to pry the microphone up off the upper case.
[* black] Slide the logic board away from the port openings and lift the assembly out of the upper case.
[* icon_reminder] Before reinstalling the logic board, it is easiest to press the microphone down into its housing in the left speaker to keep it in place
.
[* black] Insert wisdom hereLift the logic board enough to gain clearance and use a spudger to pry the microphone up off the upper case.
[* black] Slide the logic board away from the port openings and lift the assembly out of the upper case.
[* icon_reminder] Before reinstalling the logic board, it is easiest to press the microphone down into its housing in the left speaker to keep it in place
.