Modifiche al passo #9
Modifica in base a Jeff Suovanen-
Modifica approvata da Jeff Suovanen
- Prima di
- Dopo il
- Invariato
Righe Passo
[title] RAM Module #2 |
[* black] Two clips secure the RAM module in place, one on each side. Using your fingers, spread the clips away from the RAM module. |
[* icon_note] When released, the RAM module will pop up at a slight angle. |
[* black] Lift the RAM module to an angle of about 30 degrees and slide it out. |
[* icon_caution] When handling the RAM module, touch only the outside edges. Take care not to touch the gold-colored contact points along the bottom edge. |
[* icon_reminder] To install a new RAM module, slide it in place at about the same angle until it is snug, and then swing it downward until the two clips snap into place. |
Immagine 1
Nessuna immagine precedente.
Aggiunto
Immagine 2
Nessuna immagine precedente.
Aggiunto