Modifiche al passo #35
Righe Passo
| + | [* black] With the motherboard out, turn it down in a safety plane surface |
|---|---|
| + | [* red] To remove the heatsink and replace thermal paste remove these screws in the correct order(marked with a number on the heatsink) |
| + | [* icon_caution] Clean old thermal paste and ensure that the new one thermal paste had been distributed correctly, and now put screws in the correct order that it's marked from 1 to 7 always doing the same torque to maintain better heat dissipation |
| + | [* black] This isn't a How-to of how to use thermal paste, so looking for a good instructions if is your first time that you replace it, I recomend to use a good thermal paste |
Immagine 1
Nessuna immagine precedente.
Aggiunto
Immagine 2
Nessuna immagine precedente.
Aggiunto
Immagine 3
Nessuna immagine precedente.
Aggiunto