Salta al contenuto principale

Modifiche al passo #13

Modifica in base a Evan Noronha-

Modifica approvata da Evan Noronha

Prima di
Dopo il
Invariato

Righe Passo

[* black] Gently lift the logic board assembly from the heat sink end and pull it away from the port side of the case to remove it from the Air.
- [* icon_note] When replacing the logic board, insert the lobo's rubber edge under the rubber gasket closest to the display connector, then lower the board into place.
+ [* icon_reminder] When replacing the logic board, insert the board's rubber edge under the port-side rubber gasket, then lower the board into place.