Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Store

Modifiche al passo #3

Modifica in base a tweedlebop-

Modifica approvata da Geoff Wacker

Prima di
Dopo il
Invariato

Righe Passo

[* black] TheUsing a small flathead screwdriver, gently break the seal between the white plastic will displace itself enough to let you slidebacking and the metal top.
[* black] Pry up the corner with the screwdriver
[* black] Place the rubber
foot back in place.
[* black] Squeeze closed the backing and metal (it will snap into place).

[* black] Click on the plastictrackpad to test.
[* black] TheUsing a small flathead screwdriver, gently break the seal between the white plastic will displace itself enough to let you slidebacking and the metal top.
[* black] Pry up the corner with the screwdriver
[* black] Place the rubber
foot back in place.
[* black] Squeeze closed the backing and metal (it will snap into place).

[* black] Click on the plastictrackpad to test.
[* black] Insert the battery and you are done.
[* black] It may happen again when you move inadvertently a sheet of paper under the trackpad contributing involuntarily to the extraction of one of the rubber feet.