Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Store

Modifiche al passo #3

Modifica in base a Cynthia Replogle-

Modifica approvata da Cynthia Replogle

Prima di
Dopo il
Invariato

Righe Passo

[* black] Using a spudger or small flathead screwdriver, gently break the seal between the white plastic backing and the metal toptop near the missing foot opening.
[* black] Pry up the corner withslightly to allow the screwdriverfoot to be replaced.
[* black] Using a spudger or small flathead screwdriver, gently break the seal between the white plastic backing and the metal toptop near the missing foot opening.
[* black] Pry up the corner withslightly to allow the screwdriverfoot to be replaced.
[* black] Place the rubber foot back in place.
[* black] Squeeze closed the backing and metal top (it will snap into place).
[* black] Squeeze closed the backing and metal top (it will snap into place).
[* black] Click on trackpad to test.
[* black] Insert the battery and you are donescrew the battery cover closed.
[* icon_note] ItA foot may happen again dislodge, for example when you inadvertently move inadvertently a sheet of paper under the trackpad contributing involuntarilytrackpad. Repeat steps as needed to the extraction of one of the rubber feetreplace.
[* black] Insert the battery and you are donescrew the battery cover closed.
[* icon_note] ItA foot may happen again dislodge, for example when you inadvertently move inadvertently a sheet of paper under the trackpad contributing involuntarilytrackpad. Repeat steps as needed to the extraction of one of the rubber feetreplace.