Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Componenti & Strumenti

Modifiche al passo #2

Modifica in base a janesem-

In attesa di approvazione

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] Use a spudger to pry the fan connector straight up off the logic board.
[* icon_caution] Be careful! These connectors are fragile.
[* black] NOTE: Ensure you don't pull the entire assembly straight up or the base will come off the logic board. Use an extremely small straight blade screw drive to gently loosen the inside assembly while gently pulling on the wire bundle! Will save buying a new logic board!!!!