Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Componenti & Strumenti

Modifiche al passo #2

Modifica in base a Andrew Bookholt-

In attesa di approvazione

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] Use a spudger to pry the fan connector straight up offand out of its socket on the logic board.
[* icon_caution] Be careful! These connectors are fragile. The

[* icon_note] It is useful to twist the spudger axially from beneath the fan cable
wires are attached to arelease the connector.
[* icon_caution] The fan socket and the fan
connector which fits tightly into acan be seen in the second and third pictures. Be careful not to break the plastic fan socket onoff the motherboard. You are tryinglogic board as you use your spudger to lift on the wiresfan connector straight up and removeout of its socket. The layout of the connector fromlogic board shown in the socket without breakingsecond picture may look slightly different than your machine but the fan socket off ofis the motherboardsame.
[* black] Use a spudger to pry the fan connector straight up offand out of its socket on the logic board.
[* icon_caution] Be careful! These connectors are fragile. The

[* icon_note] It is useful to twist the spudger axially from beneath the fan cable
wires are attached to arelease the connector.
[* icon_caution] The fan socket and the fan
connector which fits tightly into acan be seen in the second and third pictures. Be careful not to break the plastic fan socket onoff the motherboard. You are tryinglogic board as you use your spudger to lift on the wiresfan connector straight up and removeout of its socket. The layout of the connector fromlogic board shown in the socket without breakingsecond picture may look slightly different than your machine but the fan socket off ofis the motherboardsame.

Immagine 2

Nessuna immagine precedente.

Aggiunto

Immagine 3

Nessuna immagine precedente.

Aggiunto