Modifiche al passo #11
Righe Passo
| + | [title] Secure the Fan to the chassis |
|---|---|
| + | [* black] Since the nuts may not be magnetic, start with the nut closest to the Power Supply. Position it on top of the bolt as closely to flat as possible, and use the socket bit to screw the nut in and only mildly tighten. |
| + | [* black] This might take a few attempts. The nut may bounce away. Remove the Fan Assembly to retrieve the nut and try again until you are able to get it secured. |
| + | [* black] Secure the other side of the fan using the other nut. |
Immagine 1
Nessuna immagine precedente.
Aggiunto
Immagine 2
Nessuna immagine precedente.
Aggiunto
Immagine 3
Nessuna immagine precedente.
Aggiunto