Salta al contenuto principale

Modifiche al passo #1

Modifica in base a Jake Devincenzi-

Modifica approvata da Jake Devincenzi

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] Use 2Place one wrench on the top of one of the pump riser plate bolts.
[* black] Place another wrench around the bottom of the bolt.
[* black] Pull the
wrenches apart to loosen the 4 nuts and bolts securingbolt.
[* icon_note] Repeat this procedure for
the pump riser plateremaining three bolts.
[* black] Use 2Place one wrench on the top of one of the pump riser plate bolts.
[* black] Place another wrench around the bottom of the bolt.
[* black] Pull the
wrenches apart to loosen the 4 nuts and bolts securingbolt.
[* icon_note] Repeat this procedure for
the pump riser plateremaining three bolts.