Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Componenti & Strumenti

Modifiche a questo Step

Modifica in base a Walter Galan-

Modifica approvata da Walter Galan

Prima di
Dopo il
Invariato

Righe Passo

[* black] Remove strip 04's left-handthe leftmost backing of the strip labeled 04 and align it with the bottom left edge of the rear of the displayenclosure, about a 1/4 inch away from the edge of the display glass.
[* black] Removeicon_note] Repeat the process for the longer, right-hand, backing from strip 04 and smooth itrightmost backing.
[* black] Smooth
out the strip from the center to ensure a good seal with no bubbles or wrinkles.
[* black] Remove strip 04's left-handthe leftmost backing of the strip labeled 04 and align it with the bottom left edge of the rear of the displayenclosure, about a 1/4 inch away from the edge of the display glass.
[* black] Removeicon_note] Repeat the process for the longer, right-hand, backing from strip 04 and smooth itrightmost backing.
[* black] Smooth
out the strip from the center to ensure a good seal with no bubbles or wrinkles.