Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Componenti & Strumenti

Modifiche a questo Step

Modifica in base a Walter Galan-

Modifica approvata da Walter Galan

Prima di
Dopo il
Invariato

Righe Passo

[* blackicon_note] Before you start placing strips, it is recommended to remove all of the old adhesive.adhesive around the perimeter of the rear enclosure.
[* black]
Use a spudger to scrape up an edgeedge of the rear enclosure's perimeter, then peel with your fingers.
[* icon_note] Removeicon_reminder] Repeat this process as necessary to remove all of the remainingold adhesive strips fromadhered to the perimeter of the iMac's frame and display glassrear enclosure.
[* blackicon_note] Before you start placing strips, it is recommended to remove all of the old adhesive.adhesive around the perimeter of the rear enclosure.
[* black]
Use a spudger to scrape up an edgeedge of the rear enclosure's perimeter, then peel with your fingers.
[* icon_note] Removeicon_reminder] Repeat this process as necessary to remove all of the remainingold adhesive strips fromadhered to the perimeter of the iMac's frame and display glassrear enclosure.