Salta al contenuto principale

Modifiche al passo #3

Modifica in base a Darren Chan-

In attesa di approvazione

Eliminato
Aggiunto
Invariato

Righe Passo

[* icon_note] Once you have verified that the power cord provides an adequate electrical connection, you will have to test that the cable is not [http://en.wikipedia.org/wiki/Short_circuit|shorted].
[* blue] '''Test for a potential short circuit.''' Use the multimeter leads to touchcircuit''' by touching each prong on the AC side of the power cord.
[* icon_note]
If the multimeter beeps, your power cord is bad and must be replaced immediately.
[* blue] '''Test for a potential short circuit.''' Use the multimeter leads to touchcircuit''' by touching each prong on the AC side of the power cord.
[* icon_note]
If the multimeter beeps, your power cord is bad and must be replaced immediately.
[* icon_caution] If your power cord is shorted, do not attempt to replug the cord into the AC outlet.
[* icon_noteblack] If your power cord has passed all of the steps above, then you have successfully tested that your power cord is in working order.
[* icon_noteblack] If your power cord has passed all of the steps above, then you have successfully tested that your power cord is in working order.