Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Componenti & Strumenti

Modifiche al passo #3

Modifica in base a Darren Chan-

In attesa di approvazione

Prima di
Dopo il

Righe Passo

[* icon_note] Once you have verified that the power cord provides an adequate electrical connection, you will have to test that the cable is not [|shorted].
[* blue] '''Test for a potential short circuit.''' Use the multimeter leads to touch each prong on the AC side of the power cord. If the multimeter beeps, your power cord is bad and must be replaced immediately.
[* icon_caution] If your power cord is shorted, do not attempt to replug the cord into the AC outlet.
[* icon_note] If your power cord has passed all of the steps above, then you have successfully tested that your power cord is in working order.