Salta al contenuto principale

Modifiche al passo #3

Modifica in base a Darren Chan-

In attesa di approvazione

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] Once you have verified that the power cord provides an adequate electrical connection, you will have to test that the cable is not [http://en.wikipedia.org/wiki/Short_circuit|shorted].
[* black] Use the multimeter leads to touch each prong on the AC side of the power cord. If the multimeter beeps, your power cord is bad and must be replaced immediately.
[* black] If your power cord has passed all of the steps above, then you have successfully tested that your power cord is in working order.