Modifiche al passo #8
Modifica di Dylan Norris —
Modifica approvata da Dylan Norris
- Prima di
- Dopo il
- Invariato
Righe Passo
| - | [* black] Using the phillips head side, hold on one side while tightening the nut with the socket. |
|---|---|
| - | [* black] Tighten them until they're snug, overtightening can damage the deck |
| - | [* black] Ensure the wheels are closest to the ends of the boards when installing the trucks |
| + | [* black] Use the 3/8" socket to screw on the nut |
| + | [* icon_note] Use the phillips side to hold the screw in place |
| + | [* icon_note] The hangar should face outwards |
| + | [* black] Tighten them until they're snug |
| + | [* icon_caution] Overtightening can damage the deck |