Salta al contenuto principale

Modifiche al passo #13

Modifica in base a Ben Eisenman-

In attesa di approvazione

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] Remove the following screws:
[* red] Eight 3.5 mm T6 Torx
screws securing the logic board to the upper case:
[* red] Seven 3.5 mm Phillips screws
case.
[* black] Remove the following screws:
[* red] Eight 3.5 mm T6 Torx
screws securing the logic board to the upper case:
[* red] Seven 3.5 mm Phillips screws
case.
[* orange] Two T6 Torx screws securing the DC-In board to the upper case.
[* icon_caution] Do not remove the logic board yet! There are connectors attached to the underside of the logic board that must first be disconnected.

Immagine 1

Vecchia Versione

Nuova Versione