Modifiche al passo #1
Modifica di Clay Eickemeyer —
Modifica approvata da Clay Eickemeyer
- Prima di
- Dopo il
- Invariato
Righe Passo
| [title] Remove the back screws | |
| + | [* icon_caution] For your safety, discharge the battery below 25% and power down your device before disassembly. |
| [* black] Begin by unscrewing the following 11 Phillips #1 screws from the back cover: | |
| [* red] Seven 11.6 mm screws | |
| [* orange] Two 14.6 mm screws | |
| [* yellow] One 6 mm screw | |
| [* green] One captive screw | |
| [* icon_note] During removal, loosen this captive screw before the rest of the screws. | |
| [* icon_reminder] During assembly, tighten this captive screw before any other screw. |