Modifiche al passo #29
Righe Passo
| [* black] Remove the four Phillips screws as located in the picture. | |
| - | [* red] One 7mm Phillips screw |
| - | [* orange] One 5mm Phillips screw |
| - | [* yellow] Two 7 mm Phillips screws |
| + | [* red] One 7mm Phillips screw |
| + | [* orange] One 5mm Phillips screw |
| + | [* yellow] Two 7 mm Phillips screws |
| [* yellow] These screws secure the DC-in board. | |
| [* black] Remove the bracket securing the display cable. |