Aggiusta le tue cose Community Store

Modifiche al passo #1

Modifica di LeoI07 —

Modifica approvata da LeoI07

Prima di
Dopo il
Invariato

Righe Passo

[title] PCI Card(s)
-[* black] Unscrew the Phillips screw holding the PCI card or port access cover in place.
+[* black] Unscrew the Phillips screw holding the PCI card in place.
[* black] Remove it.
-[* icon_note] If you remove all three port access covers, make sure the sheet metal shield remains underneath the edge of the logic board.
+[* black] Repeat this step for other PCI cards.
+[* icon_note] If you remove all the PCI cards and/or port access covers, make sure the sheet metal shield remains underneath the edge of the logic board.